guitar pro 5.2+RSE

Guitar Pro 5.2 + RSE.zip
Download guitarpro!

gibson new/old circuit

Cryogenic Resonance Restoration™

극 저온처리 Cryogenic Resonance Restoration™/ CRR™

대부분의 악기는 만들어지는 과정에서 일종의 스트레스를 받으면서 각각의 파트는 강제적으로 만들어지므로, 그 악기만의 울림을 제대로 갖추지 못한다.

악기의 관과 톤 홀(tone holes)은 사이즈를 늘리고 벨은 꼬아지며, 각 파트는 마지막 땜질로 악기로서의 모양을 갖게 된다. 이런 과정 속에서 금속은 스트레스를 받게 되며, 분자구조가 불안정적이게 된다.
CRR™은 -156'c의 극 저온상태로 악기를 냉각시킴으로서 불안정적인 분자구조를 규칙적이게 만들며
악기가 가진 고유의 울림을 극대화하여 최적의 상태로 만들어 준다

연주자들은 자기의 악기가 모든 음역에서의 좋은 음색과 좋은 음정을 갖기를 원한다. 그리고, 악기가 피아노시시모와 포르테에서 갈라지지 않는 다이내믹과 음정 문제에서 정확하고, 울림 있는 사운드를 원한다. 극 저온처리는 그 동안 의료계통에서 많이 사용하고 있었으나, 미국이나 일본 등에서 오디오, 스포츠, 악기 등 대한 극 저온처리 연구 및 활용이 활발하게 진행되고 있다.

kim's guitar2

superstret type ibanez style

mahogany body maple neck

original 2xhumbucker, single pickup

floyd rose bridge

stratocaster type

ash body,maple neck, original single pickup

Kim's violin

Mahogany

african mahogany

brazilian mahogany

Honduran Mahogany

mahogany is very popular wood for electric guitar. specially set in neck types

it is hevey, darkness and very stable sound.

but, not enough high tone, so using with maple top.

Maple Wood Quilted Quilt Types Display

maple wood is very beautiful and good sound wood for musical instrument

specially bookmatching flame maple guitar top, and violin back

what kind style do you like?

Marshall JCM900 POWER 100W

Marshall JCM900 POWER 100W

Out put :100Watt

EQ : 4 Band EQ

Pre Amp Valves : 3 x JCC83

Power Amp Valves : 4 x 5881

Seried Fx Loop

Dimensiond : 750mm x 310mm x 220mm

Weight : 18.8Kg

Kim's gutiar

PRS style
one piece mahogany body, flame maple top,original hand made humbucker pickup,netural varnish.

my first handmade guitar

tree piece mahogany body guitar!
I love it!

Johnson Catalyst

Johnson Catalyst - JS330

Body: Solid Alder (Quilted Maple Top)
Neck: Maple
Fretboard: Bound Rosewood
Finish: Translucent Gloss
Inlay: M.O.P. Sharktooth
Bridge: Licensed Floyd Rose Tremolo
Tuners: Die-Cast Gold
Pickups: Dual Humbuckers
Controls: Volume, Tone, 3-Way Switch
Neck Joint: Bolt-on Neck
Joint Location: Access to 24th Fret
Radius: 20"
Nut, Width: Locking, 1-5/8"
Scale Length: 25.5"
Total Length: 40"

This Guitar is Very Cheap, and Nice Quality

shovel guitar

http://www.shovellica.com/

amazing sound, amazing price!

Fender Chelsea Edition?

lol

HUMBUCKER WIRING COLOR CODE

Boss DM-2 Delay pedal

Boss DM-2 Delay pedal

• Controls: Repeat Rate, Echo, Intensity
• Connectors: Input, Output, AC Adaptor
• Input Impedance: 470kΩ
• Output Load Impedance: over 10kΩ
• Residual Noise Level: less than -100dBm (IHF-A)
• Delay Time: 20ms-300ms
• Recommended AC Adaptor: ACA Series
• Current Draw: 11mA (DC 9V)
• Dimensions: 70(W) x 55(H) x 125(D)mm
• Weight: 450g

there are at least 3 different versions of this circuit. The first DM-2 version was using the MN3005 BBD and the MN3101 Clock Driver IC (PCB marking: ET5214-510).

Later they changed the clock driver to MN3102 and the BBD to the low current version of the same circuit, the MN3205 (PCB markings: ET5214-510A and ET5214-510B). The MN3205 is a little noisier, but it generates less distortion (only 0.8% compared to 1% for the MN3005).

ICs, transistors and diodes used in the Boss DM-2 Delay:

• IC1: uPC4558C or JRC4558DD (dual operational amplifier)
• IC2: NE570N (compandor IC)
• IC3: MN3005 or MN3205 (4096-stage BBD)
• IC4: MN3101 or MN3102 (BBD clock generator/driver)
• Q1-Q4: 2SC732TM-GR (NPN silicon transistors)
• Q5: 2SK30ATM-Y (N-channel JFET transistor)
• Q6, Q7: 2SC945-P (NPN silicon transistors)
• D1, D2, D5: 1S2473 (switching diodes)
• D3: RD5.6EB3 (5.6V Zener diode)
• D4: RD11EB3 (11V Zener diode)
• LED: SLP 135B (red LED)

The Boss DM-2 analog delay pedal was sold from 1981 to 1984 and is still sought after thanks to its warm, natural sound. Produces a delay time ranging from 20 to 300 milliseconds, and has 3 knobs (Repeat Rate, Intensity and Echo).

Boss CE-2 chorus pedal

Boss CE-2 chorus pedal

• 2 Control Knobs: Rate and Depth
• Connectors: Input, Output, AC Adaptor
• Input Impedance: 470kOhm
• Signal/Noise Ratio: more than 90dB (IHF-A)
• Output Load Impedance: over 10kOhm
• Maximum Allowable input: 0dBm(100Hz), -10dBm(1kHz)
• Recommended AC Adaptor: ACA Series
• Current Draw: 9 mA (DC 9V)
• Weight: 400 grams (0.88 lbs.)
• Dimensions(mm): 70(W) x 55(H) x 125(D)

The circuit is designed around the MN3007 1024 stage BBD (IC3) and the MN3101 clock driver (IC4). The input and output circuits use a uPC4558C IC while the LFO is made with the help of a TL022LP op-amp IC.

ICs, transistors and diodes used in the Boss CE-2 chorus:

• D1, D2, D4, D5 and D8: 1S2473 or 1S1588 (switching diodes)
• D3: 1S2473 (replaced with a wire jumper in newer models)
• D6: RD5.1EB (5.1V Zener diode)
• D7: RD11EB (11V Zener diode)
• Q1-Q3: 2SC732TM-GR (NPN silicon transistors)
• Q4-Q8: 2SC945-P (NPN silicon transistors)
• Q9: 2SK30A-Y (Silicon N-channel junction field effect transistor)
• LED diode: SLP-135B

Adjustment procedure:

Turn the Rate knob fully counterclockwise (min.) and the Depth knob fully clockwise (max.). Feed a 200Hz, +3dBm sine signal into the input. Connect an oscilloscope to the emitter of Q3 and turn VR3 until you'll get a centered operating point (a symmetrical sine wave, equally clipped at top and bottom).

The Boss CE-2 is a great analog chorus pedal from the late 70s and early 80s.
the marketing of the CE-2 was stopped in November 1982, but the pedal was still produced and sold at least until 1990. Even though it's no longer in production there are thousands of these pedals being used by guitarists all over the world

Boss CS-2 Compression Sustainer pedal

Boss CS-2 Compression Sustainer pedal

• Controls: Level, Attack, Sustain
• Connectors: Input, Output, AC Adaptor
• Input Impedance: 1MΩ (FET input)
• Output Load Impedance: over 10kΩ
• Compression Range: 38dB
• Maximum Input Level: -10dBm at 1kHz
• Maximum Output Level: -10dBm
• Equivalent Input Noise: -110dBm (IHF-A)
• Recommended AC Adaptor: ACA Series
• Current Draw: 4mA (DC 9V)
• Dimensions: 70(W) x 55(H) x 125(D)mm
• Weight: 400g

ICs, transistors and diodes used in the Boss CS-2 pedal:

• IC1: BA662A (VCA - Voltage Controlled Amplifier IC)
• Q1, Q2, Q3: 2SK30ATM-Y (N-channel JFET transistors)
• Q4, Q5, Q6: 2SC732TM-GR (NPN silicon transistors)
• Q7-Q11: 2SC1815-BL (NPN silicon transistors)
• D1: S5500G (400V/1A rectifier diode)
• D2-D6: 1S2473 (switching diodes)
• D7: RD5.1EB3 (5.1V Zener diode)
• LED: SLP135B (red LED)

The Boss CS-2 Compression Sustainer effect was sold from December 1981 to June 1986. The pedal compresses high-input level signals while boosting low-input level signals, producing a smooth and long sustain without degrading the quality of the original guitar sound.

Boss HM-2 Heavy Metal pedal

Boss HM-2 Heavy Metal pedal

• 4 Control Knobs: Level, Color mix (Low, High) and Dist.
• Connectors: Input, Output, AC Adaptor
• Input Impedance: 1MΩ (FET input)
• Recommended Load Impedance: more than 10 kOhm
• Recommended AC Adaptor: ACA Series
• Current Draw: 10mA (DC 9V)
• Weight: 400g
• Dimensions(mm): 70(W) x 55(H) x 125(D)
• Dimensions(inches): 2-3/4(W) x 2-3/16(H) x 4-15/16(D)

ICs, transistors and diodes used in the HM-2:

• IC1-IC3: M5218L or NJM4558S (dual operational amplifiers)
• Q1,Q4,Q5,Q10: 2SK30A-Y (Silicon N-channel JFET transistors)
• Q2,Q3: 2SC732TM-GR (NPN silicon transistors)
• Q8,Q9: 2SC945-P (NPN silicon transistors)
• Q6: 2SC2240-GR (NPN silicon transistor)
• Q7: 2SA970-GR (PNP silicon transistor)
• D1,D3,D5,D8-D12: 1S2473 (switching diodes)
• D2: S5500G (400V/1A rectifier diode)
• D6,D7: 1S188FM (Germanium diodes)
• D13: RD5.1EB-3 (5.1V Zener diode)
• D14: SLP135B (red LED)

The Boss HM-2 Heavy Metal pedal generates a unique distortion effect specially designed for Heavy Metal music. It has an interesting design with both asymmetric soft-clipping diodes, hard clipping diodes and a Ge diode pair in series with the signal for crossover distortion and simple noise gate. A wide variety of tone color creation is made possible with the 2 color mix controls.

Boss TR-2 Tremolo pedal

Boss TR-2 Tremolo pedal

• 3 Control Knobs: Rate, Wave, Depth
• Connectors: Input, Output, AC Adaptor
• Input Impedance: 1MΩ (FET input)
• Nominal Input Level: -20dBu
• Nominal Output Level: -20dBu
• Residual Noise Level: -90dBu
• Recommended AC Adaptor: PSA Series
• Current Draw: 20mA (DC 9V)
• Weight: 400g
• Dimensions(mm): 73(W) x 59(H) x 129(D)
• Dimensions(inches): 2-7/8(W) x 2-3/8(H) x 5-1/8(D)

ICs, transistors and diodes used in the TR-2 Tremolo pedal:

IC1: M5207L01 (Dual VCA - Voltage controlled amplifier IC with linear control)

IC2,IC3,IC4: M5218AL (Dual low-noise operational amplifiers)

Q1, Q3: 2SK118Y (N-Channel JFET)

Q2, Q5, Q7: 2SC2458GR (NPN silicon transistors)

Q4: 2SK184GR (N-Channel JFET)

Q6: 2SA1048GR (PNP silicon transistor)

D1, D4: 1N4004 (400V/1A rectifier diode)

D2, D3: 1SS133 (switching diodes)

D5: MTZ5.6B (5.6V Zener diode)

The Boss TR-2 Tremolo pedal generates the classic tremolo effect, periodically changing the volume of the sound. The 3 control knobs provide a multitude of effect possibilities: the Depth control determines the strength of the effect, the Rate knob controls the speed and the Wave pot alters the LFO waveform from triangle to square.

Boss OC-2 Octave pedal

Boss OC-2 Octave pedal

• 3 Controls: Octave 1 Level, Octave 2 Level and Direct Level
• Connectors: Input, Output, AC Adaptor
• Residual noise: -100dBm (IHF-A)
• Maximum input level: -5dBm
• Maximum output level: 0dBm
• Input impedance: 1MΩ (FET input)
• Output load impedance: > 10kΩ
• Minimum operating input level: -60dBm al 250Hz
• AC Adaptor: ACA series (black label) or PSA series (silver label)
• Current Draw: 4mA (DC 9V)
• Weight: 400g (including battery)

ICs, transistors and diodes used in the OC-2:

• IC1-IC5: TL022CP dual operational amplifiers
• IC6: BA634 (Single T-Type Flip-Flop IC)
• IC7: uPD4013C (Dual D-Type Flip-Flop IC)
• Q1, Q3, Q4, Q7, Q8: 2SK30ATM-Y (N-channel JFET transistors)
• Q2: 2SC732TM-GR (NPN silicon transistor)
• Q5, Q6: 2SC1815-Y (NPN silicon transistor)
• D1: S5500G (400V, 1A switching diode)
• D2: RD5.1EB-3 (500mW 5.1V Zener diode)
• D3-D9: 1SS133 (switching diodes)
• D10, D11: 1S-188FM (Germanium diodes)

The Boss OC-2 Octave pedal produces additional tones, one and two octaves below the original note. The pedal has a direct level control knob for exact tonal shaping and separate controls for octave 1 (OCT1) and octave 2 (OCT 2).

Boss MT-2 Metal Zone distortion pedal

Boss MT-2 Metal Zone distortion pedal

• Input Impedance: 1MΩ
• Output Impedance: 1kΩ
• Recommended Load Impedance: 10kΩ or greater
• Equivalent Input Noise Level: -110 dBu or less (IHF-A, Typ.)
• Connectors: Input jack, Output jack, AC adaptor input
• Controls: Distortion, Middle level, Middle frequency, High level, Low level, Level
• Power Supply: 9V Battery or PSA-Series AC Adaptor
• Current Draw: 20mA (DC 9V)
• Width: 70mm (2-3/4")
• Depth: 125mm (4-15/16")
• Height: 55mm (2-3/16")
• Weight: 410g/15 oz

The MT-2 Metal Zone™ is one the most popular guitar pedals, providing over-the-top, insane distortion tones with huge mids and lows and an ultra-saturated sound. It has a unique dual-gain circuitry, providing long sustain and heavy mids and lows like a stack of overdriven amplifiers. The 3-band equalizer with semi-parametric mid control offers a wide range of extreme distortion textures.

Boss SD-1 Super Overdrive pedal

Boss SD-1 Super Overdrive pedal

• 3 controls: Level, Tone, Drive
• Connectors: Input Jack, Output Jack, AC Adaptor
• Input Impedance: 470kΩ
• Output Load Impedance: over 10kΩ
• Power Supply: 9V Battery (6F22/9V), AC Adaptor
• AC Adaptor: PSA-Series
• Current Draw: 4 mA (DC 9V)
• Width: 70mm
• Depth: 125mm
• Height: 55mm
• Weight: 0.4kg (15 oz.)

ICs, transistors and diodes used in the SD-1 Super OverDrive:

• IC: uPC4558C (dual operational amplifier)
• Q1, Q2: 2SK30ATM-Y (Silicon N-channel JFET transistors)
• Q3, Q4: 2SC945-P (NPN silicon transistors)
• Q5, Q6: 2SC732TM-GR (NPN silicon transistors)
• D1: RD11EB-3 (11V 500mW Zener diode)
• D2: RD5.1EB-3 (5.1V 500mW Zener diode)
• D3-D8: 1S2473 (switching diodes)

The Boss SD-1 Super OverDrive is a pedal with a simple design, using only one dual operational amplifier (uPC4558C) and 6 transistors, with an asymmetric overdrive circuitry for a classic, natural tube amp growl. It generates the warm distortion of an overdriven tube amplifier while maintaining the subtle nuances of a guitar player's picking technique.

The schematic is nearly identical to the classic OD-1 OverDrive, the only major difference is the tone control circuit. The design is simple and easy to follow: the guitar signal is buffered with Q5 and enters the first half of the uPC4558C dual operational amplifier. There are 3 silicon diodes in the negative feedback path of the op-amp. Two diodes are in one direction and only one in the other. This arrangement produces asymmetrical soft clipping -- one side of the waveform is clipped more severely than the other. The tone corrector and level control circuits are next. The signal finally exits the circuit after the output buffer made with Q6. The bypass circuit uses a classic arrangement with 2 JFETs (Q1 and Q2) serving as solid-state switches and a symmetrical bistable multivibrator made with Q3 and Q4.

Boss OD-2 Turbo OverDrive pedal

Boss OD-2 Turbo OverDrive pedal

• Controls: Level, Tone, Drive, 2-way Mode switch
• Connectors: Input, Output, AC Adaptor
• Input Impedance: 1Mohm
• Output Load Impedance: 10kohm or more
• Equivalent Input Noise: -118dBm or less (IHF-A, Tone center, Input Short)
• Recommended AC Adaptor: ACA Series
• Current Draw: 10mA @ 9V
• Dimensions: 70(W) x 55(H) x 125(D)mm
• Weight: 410g (14 oz)

Transistors and diodes used in the OD-2 Turbo OverDrive:

• Q1, Q6, Q8, Q9, Q21: 2SC945-P (NPN silicon transistors)
• Q3, Q4, Q7, Q16, Q17: 2SK30A-Y (N-channel JFET transistors)
• Q5,10,11,13,14,18,19: 2SK117-GR (N-channel JFET transistors)
• Q12, Q15, Q20: 2SA970-GR (PNP silicon transistors)
• Q2: 2SC2240-GR (NPN silicon transistor)
• D1,3,4,5,7,9,10,11,12: 1SS-133 (switching diodes)
• D2: S5500G (400V/1A rectifier diode)
• D6: RD6.2JB-2 (6.2V Zener diode)
• D8: MTZ6.6 (6.6V Zener diode)
• LED: LN28RP (red LED)

The OD-2 was manufactured as a replacement for the OD-1 in the mid 1980s and uses only discrete components. It has 3 potentiometers for level, drive, tone control and a switch for selecting two modes of operation. When set to the OFF position the sound is similar to the OD-1 but in the turbo mode it generates more gain and distortion.